Jafuji - Products

Heavy Duty High Precision Bench Centre 3010 / 3030

SPECIFICATIONS

Table and centre heads are made from closed cast iron, seasoned, stress relieved and finished on the working face and reference side edge of the table by hand scraping to meet with the Required accuracy’s as per BIS Standards.

The Centre stock spindle bearings are smooth lapped to ensure accuracy of the spindle height and relationship to reference side edge. The centres are of hardened high carbon steel accurately ground on the diameter and conical point.

One centre is spring loaded to accommodate small variations in component length. Tee slot at 45 degree angle on the surface table and teebolt through hole at the base of the centre stocks ensure firm engagement with the reference side edge of the table. Each centre stock can be locked in any position along the tee slot by means of knurled hand knobs.

Precision Bench Centres are produced by experienced craftsmen, whose skill combined with modern measuring equipment and precision machining produces Bench Centres of unequalled quality and reliability.

Non working faces of the Bench Centre are painted hammertone grey enamel.

S. NO	CODE NO	DIMENSIONS
1	BC-3010	Bench Center 300X125 mm
2	BC-3020	Bench Center 500X125 mm
3	BC-3030	Bench Center 500X160 mm
4	BC-3040	Bench Center 500X200 mm
5	BC-3050	Bench Center 750X160 mm
6	BC-3060	Bench Center 750X200 mm
7	BC-3070	Bench Center 1000X160 mm
8	BC-3080	Bench Center 1000X200 mm
9	BC-3090	Bench Center 1250X160 mm
10	BC-3100	Bench Center 1250X200 mm
11	BC-3120	Bench Center 1500X160 mm
12	BC-3130	Bench Center 1500X200 mm
13	BC-3140	Bench Center 1500X250 mm
14	BC-3150	Bench Center 2000X200 mm

Precision Bench Centre

Casting: Grade 20 of IS 210 – 1962 with Minimum Hardness of 180 HB.
Centres: Quality Steel of Hardness of 750 HV.
Co – ordinate Clamping: Fine Functional ribs for casting. Pre – loaded spring with length adjustment by a micrometric knob seasoned castings. Spring loaded centre on one side.